|
Most manual wheelchairs can accommodate the Scalamobil. A simple bracket installation is all that is required! Wheelchairs must meet the following criteria*:
|
- Seat width of wheelchair must be be between 11″ and 23″ wide. Seat to floor height must be at least 16″.
- Rear wheels must be quick release style. (We can covert in most cases.)
- Area under seat must be free of devices such as ventilators, oxygen tanks, etc.
|
|
| |
|
|
| *If your wheelchair does not meet these requirements, please go to Transfer Systems for information on alternative ways to use the Scalamobil. |
| |
|
|
|
|
| |
|
|
Using the Scalamobil is fast and easy!
-
Roll the Scalamobil under the wheelchair seat and fasten to the brackets using the quick release pins.
-
Using the Scalamobil, slightly lift the wheelchair up and remove the rear wheels.
-
Position the wheelchair at the steps and you are ready to climb!
|
| |
After replacing the rear wheels, the wheelchair can still be pushed with the Scalamobil attached.
|
|
 |
